Steel Mart

We offer a wide range of Transformer Stampings that are used variedly in industrial applications. We offer them in the highest quality that is unmatched in the market. These are fabricated with the help of latest machines and are duly cut on power presses and the dies used. All our CRGO materials are stress relieved/ annealed for lower watt. Thy are described below:

Lamination Stampings Division:-

• CRGO ( M 3 – M 4 - M 5 grades- Japanese / European / American)
• CRNGO ( M 43 – M 45 - M47 grades- Indian / Japanese / Russian)
• CRNGO ( 0.65mm thk)
• Silicon Lamination Stampings in “E&I” types in the smallest size of type no: L164 to biggest size of 8B laminations + “F” + “C” + “U” types
• Torodial Cores - all sizes as per requirements
• Transformer Stampings & Strips / V notch strips(Mitred Strips) for the transformers ranging from 16 KVA upto 1000 KVA + Strips ( with & without holes).

• Steel mart offers CRGO ( M 3 – M 4 - M 5 grades- Japanese / European / American)
• CRNGO ( M 43 – M 45 - M47 grades- Indian / Japanese / Russian)
• CRNGO ( 0.65mm thk)
• Silicon lamination stampings in “E & I” types in the smallest size of type no: L164 to biggest size of 8B laminations + “F” + “C” + “U” types
• Torodial cores - all sizes as per requirements
• Transformer stampings & strips / V notch strips(Mitred Strips) for the transformers ranging from 16 KVA upto 1000 KVA + Strips ( with & without holes) .

All materials made from PRIME raw materials and duly cut on Power Presses and the Dies used are Hi-Tech which ensures Best Quality Laminations are produced. All CRGO materials are Stress Relieved / Annealed for lower Watt losses.

Specifications:

• Type:Non-oriented Silicon Steel
• Technique:Hot Rolled
• Dimensions:Customer Requirement
• Surface Treatment:Coated
• Shape:Steel Coil
• Steel shape:Steel Coil Crgos
• Description:Cold Rolled Non-Oriented Electrical
• Shape:EI,non-standard E

• CRGO ( M 3 – M 4 - M 5 grades- Japanese / European / American)
• CRNGO ( M 43 – M 45 - M47 grades- Indian / Japanese / Russian
• Silicon lamination stampings in “E & I” types in the smallest size of type no: L164 to biggest size of 8B laminations + “F” + “C” + “U” types
• Torodial cores - all sizes as per requirements
• Transformer stampings & strips / V notch strips(Mitred Strips) for the transformers ranging from 16 KVA upto 1000 KVA + Strips ( with & without holes) .

All materials made from PRIME raw materials and duly cut on Power Presses and the Dies used are Hi-Tech which ensures Best Quality Laminations are produced. All CRGO materials are Stress Relieved / Annealed for lower Watt losses

• Steel mart offers CRGO ( M 3 – M 4 - M 5 grades- Japanese / European / American)
• CRNGO ( M 43 – M 45 - M47 grades- Indian / Japanese / Russian)
• CRNGO ( 0.65mm thk) Silicon lamination stampings in “E & I” types in the smallest size of type no: L164 to biggest size of 8B laminations + “F” + “C” + “U” types Torodial cores - all sizes as per requirements
• Transformer stampings & strips / V notch strips(Mitred Strips) for the transformers ranging from 16 KVA upto 1000 KVA + Strips ( with & without holes).

• Type:Non-oriented Silicon Steel
• Technique:Hot Rolled
• Dimensions:Customer Requirement
• Surface Treatment:Coated
• Shape:Steel Coil
• Steel shape:Steel Coil Crno

• CRGO ( M 3 – M 4 - M 5 grades- Japanese / European / American)
• CRNGO ( M 43 – M 45 - M47 grades- Indian / Japanese / Russian)
• Silicon lamination stampings in “E&I” types in the smallest size of type no: L164 to biggest size of 8B laminations + “F” + “C” + “U” types
• Torodial cores - all sizes as per requirements

Transformer stampings & strips / V notch strips(Mitred Strips) for the transformers ranging from 16 KVA upto 1000 KVA + Strips ( with & without holes) .

All materials made from PRIME raw materials and duly cut on Power Presses and the Dies used are Hi-Tech which ensures Best Quality Laminations are produced. All CRGO materials are Stress Relieved / Annealed for lower Watt losses

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer)

• Steel Mart Is An Iso 9001-2015 Company And It Offers Aisi 1018 Roll Cage Pipes
• Steel Mart Offers Aisi 1018 Roll Cage Pipes Which Are Supplied In Rounds, Flats N Plates Sections
• Aisi 1018 Roll Cage Pipes Are Used To By Major Industrial Units
• Aisi 1018 Roll Cage Pipes Is Being Supplied To The Indian Consumers As Well As Foreign Buyers
• Steel Mart Supplies Genuine & Tested Aisi 1018 Roll Cage Pipes And The Tc For The Same Can Be Submitted With Supplies
• Kindly Contact Steel Mart For Your Requirements Of Aisi 1018 Roll Cage Pipes
• Steel Mart Also Offers Other Grades In Tool – Alloy – Die – Spring – Stainless & Special Steels Apart From The Aisi 1018 Roll Cage Pipes

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer)

All materials made from PRIME raw materials and duly cut on Power Presses and the Dies used are Hi-Tech which ensures Best Quality Laminations are produced. All CRGO materials are Stress Relieved / Annealed for lower Watt losses

Product Details:

• CRGO ( M 3 – M 4 - M 5 grades- Japanese / European / American)
• CRNGO ( M 43 – M 45 - M47 grades- Indian / Japanese / Russian)
• Silicon lamination stampings in “E & I” types in the smallest size of type no: L164 to biggest size of 8B laminations + “F” + “C” + “U” types
• Torodial cores - all sizes as per requirements

• Steel mart offers CRGO ( M 3 – M 4 - M 5 grades- Japanese / European / American)
• Crngo ( M 43 – M 45 - M47 grades- Indian / Japanese / Russian)
• Crngo ( 0.65mm thk)Silicon lamination stampings in “E & I” types in the smallest size of type no: L164 to biggest size of 8B laminations + “F” + “C” + “U” types Torodial cores - all sizes as per requirements Transformer stampings & strips / V notch strips(Mitred Strips) for the transformers ranging from 16 KVA upto 1000 KVA + Strips ( with & without holes) .
• All materials made from PRIME raw materials and duly cut on Power Presses and the Dies used are Hi-Tech which ensures Best Quality Lamination's are produced.
• All CRGO materials are Stress Relieved / Annealed for lower Watt losses

• Type:Non-oriented Silicon Steel
• Technique:Hot Rolled
• Dimensions:Customer Requirement
• Surface Treatment:Coated
• Shape:Steel Coil
• Steel shape:Steel Coil Crgos
• Description:Cold Rolled Non-Oriented Electrical
• Shape:EI,non-standard E

• Steel Mart Offers All Kinds Of Transformer Stampings
• The Transformer Stampings Offered By Steel Mart Is 100% Ok – Tested
• Steel Mart Is Renowned For The Supply Of Genuine Transformer Stampings
• Steel Mart Will Provide The Test Certificate For Transformer Stampings
• Kindly contact STEEL MART for your requirements of Transformer Stampings and we shall offer our most reasonable rates for the same

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer)
• Production Capacity: 100 TONS
• Delivery Time: 1 WEEK

• Steel mart offers CRGO ( M 3 – M 4 - M 5 grades- Japanese / European / American)
• CRNGO ( M 43 – M 45 - M47 grades- Indian / Japanese / Russian)
• Silicon lamination stampings in “E&I” types in the smallest size of type no: L164 to biggest size of 8B laminations + “F” + “C” + “U” types
• Torodial cores - all sizes as per requirements

Transformer stampings & strips / V notch strips(Mitred Strips) for the transformers ranging from 16 KVA upto 1000 KVA + Strips ( with & without holes) .

All materials made from PRIME raw materials and duly cut on Power Presses and the Dies used are Hi-Tech which ensures Best Quality Laminations are produced. All CRGO materials are Stress Relieved / Annealed for lower Watt losses

Specifications

• Type:Non-oriented Silicon Steel
• Technique:Hot Rolled
• Dimensions:Customer Requirement
• Surface Treatment:Coated
• Steel shape:Steel Coil Crgos

• CRGO E & I Lamination Stamping Size 43
• Steel mart has 2 units in Panvel to manufacture & supply all kinds of CRGO & CRNO Transformer - lamination stampings in E&I types and also strips & wound - toroidal core types .
• Steel mart specializes in CRGO Transformer Mitred - V Notch stampings

All the materials are manufactured from Prime raw materials and are punched on 20 - 30 & 40 M/T power presses to ensure Burr Free quality.

• CRGO ( M 3 – M 4 - M 5 grades- Japanese / European / American)
• CRNGO ( M 43 – M 45 - M47 grades- Indian / Japanese / Russian)
• Silicon lamination stampings in “E&I” types in the smallest size of type no: L164 to biggest size of 8B laminations + “F” + “C” + “U” types
• Torodial cores - all sizes as per requirements

Transformer stampings & strips / V notch strips(Mitred Strips) for the transformers ranging from 16 KVA upto 1000 KVA + Strips ( with & without holes) .

All materials made from PRIME raw materials and duly cut on Power Presses and the Dies used are Hi-Tech which ensures Best Quality Laminations are produced. All CRGO materials are Stress Relieved / Annealed for lower Watt losses

• CRGO ( M 3 – M 4 - M 5 grades- Japanese / European / American)
• CRNGO ( M 43 – M 45 - M47 grades- Indian / Japanese / Russian)
• Silicon lamination stampings in “E & I” types in the smallest size of type no: L164 to biggest size of 8B laminations + “F” + “C” + “U” types
• Torodial cores - all sizes as per requirements

Transformer stampings & strips / V notch strips(Mitred Strips) for the transformers ranging from 16 KVA upto 1000 KVA + Strips ( with & without holes) .

All materials made from PRIME raw materials and duly cut on Power Presses and the Dies used are Hi-Tech which ensures Best Quality Laminations are produced. All CRGO materials are Stress Relieved / Annealed for lower Watt losses

We offer our Lamination Strips that are made from high quality of raw materials.

• These are duly cut on power presses and the dies used are made of high technology that ensures best quality of laminations.
• Our CRGO materials are stress relieved/ annealed for lower watt losses.
• Our range is given below:

Lamination Specifications:

Stampings Division-

• CRGO ( M 3 – M 4 - M 5 grades- Japanese / European / American)
• CRNGO ( M 43 – M 45 - M47 grades- Indian / Japanese / Russian)
• Silicon Lamination Stampings in “E&I” types in the smallest size of type no: L164 to biggest size of 8B laminations + “F” + “C” + “U” types
• Torodial Cores - all sizes as per requirements
• Transformer Stampings & Strips / V notch strips(Mitred Strips) for the transformers ranging from 16 KVA upto 1000 KVA + Strips ( with & without holes) .

Steel mart has 2 units in Panel to manufacture & supply all kinds of CRGO & CRNO Transformer - lamination stampings in E&I types and also strips & wound - toroidal core types. Steel mart specializes in CRGO Transformer Mitred - V Notch stampings All the materials are manufactured from Prime raw materials and are punched on 20 - 30 & 40 M/T power presses to ensure Burr Free quality.

• CRGO ( M 3 – M 4 - M 5 grades- Japanese / European / American)
• CRNGO ( M 43 – M 45 - M47 grades- Indian / Japanese / Russian)
• Silicon lamination stampings in “E & I” types in the smallest size of type no: L164 to biggest size of 8B laminations + “F” + “C” + “U” types
• Torodial cores - all sizes as per requirements

Transformer stampings & strips / V notch strips(Mitred Strips) for the transformers ranging from 16 KVA upto 1000 KVA + Strips ( with & without holes) .

All materials made from PRIME raw materials and duly cut on Power Presses and the Dies used are Hi-Tech which ensures Best Quality Laminations are produced. All CRGO materials are Stress Relieved / Annealed for lower Watt losses